Bmw Tis Software

1. Bmw Dis Software
2. Bmw Tis Software

Free download Dealership BMW Diagnostic Information System DIS V57:

Dis v57 free download:

BMW's Technical Information System is the factory service and repair information authorized BMW dealers use every day to service and repair BMW automobiles worldwide. Changes made to something in the vehicle gets documented in the TIS. The ETK frequently refers to a TIS (or SI) document when parts are needed.

or

The second link is more reliable, tested without any issue!

Dis v57 configuration:

How to configure dis v57 & vmware vmnet1 & ediabas.ini file to get connection

BMW DIS V57 Source Code Control System IDENTIFICATION (SCCS ID) IS A UNIX BASED FILE OWNERSHIP COMMAND. IS USED TO ASSIGNED FILE OWNERSHIP IN DIS V57 TO TALK TO THE EDIABAS.INI SETTINGS AS WELL AS IN THE VMWARE NETWORK to TALK to THE vmnet1 Host Only ip address 192.168.68.1

THIS ALLOWS DIS V57 TO READ & CONFIRM THE ip address & port commands in the VMWARE AS WELL AS IN THE EDIABAS.INI CONFIGURATION FILE , WHICH IS CONFIGURED AS:
YOUR ediabas.ini file should be like this:

RemoteHost
; Description : server address/name
; Default = diaghead
RemoteHost = 192.168.68.1

;—————————————————————————–
; Port
; Description : IP communication port
; Value : 1000 < port < 30000
; Default =
Port = 6801
I am using a std:obd2 Ediabas interface unit from ebay. From china.

NOW LETS START UP DIS V57

CLICK ON THE SCREEN AREA OF DIS V57 WITH YOUR MOUSE.
LET US NOW ENTER INTO THE: TOUCH SCREEN CALIBRATION
IN DIS V57 SCREEN TYPE: ON YOUR KEYBOARD PRESS THESE KEYS: CTRL+SHIFT+PRNT SYSRq
IT WILL SHOW YOU THE: SCO OPENSERVER ™ RELEASE 5 (gt1ap) (tty03)
Login:
Type in: ' root' type it in without the quotes.
Then Hit the Enter Key
FOR THE PASSWORD:
Type in: '12345' type it in without the quotes
Then Hit The Enter Key
AFTER THIS # SIGN TYPE IN like this
# vi ediabas.ini
Then Hit the Enter Key
Type in the letter O
This allows you to start type in a line indicated by a white cursor :
Type this in line one.
RemoteHost= 192.168.68.1
Port= 6801
RemoteHost= diaghead
Your done here.. (please note) The letter X on the keyboard if depressed it means delete, as well IT CAN BE USED TO TYPE an X.

As the letter 'i' WHICH MEANS TO EDIT A CHARACTR or WORD. To delete with X , you must highlight the character first with the cursor using the arrow keys on your keyboard PRESS THE DELETE BUTTON AND THEN X

:wq means to saves the changes you have made.
:q means quit without save the changes.
Type in this
:wq
Hit enter key
This number sign will appear # . just type beside the # sign like this
# vi host
And then hit the enter key
The host page will appear
Type the letter O (please note) the letter O should not be visible on the page at any time.
This allows the cursor for you to type in the first line:
Should look like this:
127.0.0.1 localhost
192.168.68.1 diaghead diaghead
Type letter O again.
It allows you to drop down the cursor to the next line under what you just typed
Your done here.
Type in the :wq
Then hit enter key.Then # will appear.
#

Type in: init 6

the line should look like this: # init 6

AND THEN HIT ENTER KEY to reboot DIS V57 JUST BE PATIENT.

The following allows you to shutdown DIS V57. COMPLETELY WITHOUT REBOOTING IT.
(THIS COMMAND: init 0 .It means the number zero and not the letter O , Then hit your enter key on your keyboard.
This Command Closes DIS V57.)

AFTER DIS V57 IS REBOOTED GO TO THE ADMINISTRATION SCREEN

CLICK ON 'CONNECTION SETUP'
CLICK ON 'CONNECTING'

IF IT IS DONE RIGHT THE CONNECTION WILL SUCCESSFULL

Bmw Dis Software

IF YOU GET A AN IP ADDRESS CONFLICT WINDOW JUST CLICK ON IGNORE.
YOU WILL SEE CONNECTING CONFIGURATION STATUS WINDOW OPEN UP AND RUNNING.

IF IT IS CONFIGURED CORRECTLY YOU WILL SEE A YELLOW DIAGHEAD SYMBOL IN THE UPPER RIGHT CORNER, ALONG WITH THE TWO CABLE & COMPUTER SIGNAL AR FULL STRENGTH.

YOUR DONE. CONNECT YOUR STANDARD OBD2 EDIABAS INTERFACE TO YOUR BMW CAR AND TURN IGNITION TO IGN1. OR START UP YOUR CAR IF YOU WANT TO SEE RPM SIGNAL ETC…

Bmw Tis Software